Teltonika TRB141 - LTE CAT 1 Gateway

Přidat do oblíbených

Teltonika TRB141 - LTE CAT 1 Gateway

Akce -10% Výprodej zásob

4G LTE Cat1 – I/O IoT gateway se vstupy/výstupy, slotem na SIM kartu a konfigurovatelnými I/Os. Mobilní data 4G (LTE) – Cat1 až do 10 Mbps, 3G až do 42 Mbps, 2G až do 236,8 Kbps. Operační systém RutOS (Linux based) pro možnost přizpůsobení. Více

Výrobce: Teltonika Kód: TRB141

Původní cena 2 860 Kč bez DPH. Ušetříte 10% (286 Kč bez DPH) 2 574 Kč bez DPH (3 114,54 Kč s DPH)
Recyklační poplatek 1 Kč zahrnutý v ceně.
Skladem
ks

4G LTE Cat1 – I/O IoT gateway se vstupy/výstupy, slotem na SIM kartu a konfigurovatelnými I/Os. Mobilní data 4G (LTE) – Cat1 až do 10 Mbps, 3G až do 42 Mbps, 2G až do 236,8 Kbps. Operační systém RutOS (Linux based) pro možnost přizpůsobení. Více

Výrobce: Teltonika Kód: TRB141

Gateway TRB141 má slot na 1 SIM kartu, několik vstupů/výstupů a 2× konfigurovatelný vstup/výstup na napájecím konektoru.

Použití

Tato gateway je ideální pro aplikace, kde musí být zařízení bezpečně vzdáleně spravováno pomocí vstupů a výstupů (I/Os).

Gateway má mnoho vlastností, díky kterým je ideální pro průmyslové aplikace.

Hlavní vlastnosti TRB141

  • Několik vstupu/výstupů,
  • 2× konfigurovatelný vstup/výstup,
  • Micro-USB port pro virtuální síťové rozhraní,
  • široký rozsah napájecího napětí (9–30 V),
  • kompaktní rozměry,
  • krytí IP30,
  • SMS control, Firewall, OpenVPN, IPsec, FOTA, SSH, MQTT, JSON-RPC, Modbus, Teltonika RMS,
  • operační systém OpenWrt Linux based.

Vstupy a výstupy

Teltonika TRB141 je osazena navíc:

  • Dvěma digitálními vstupy,
  • izolovaným vstupem,
  • analogovým vstupem (4–20 mA),
  • dvěma reléovými výstupy,
  • dvěma konfigurovatelnými vstupy/výstupy na čtyřpinovém napájecím konektoru.

Všechny tyto vstupy a výstupy můžeme použít například pro vzdálenou správu zařízení, které musí být spravováno pomocí I/O. Tuto vzdálenou správu můžeme pohodlně provádět v portálu Teltonika Remote Management System (RMS).

S konfigurovatelnými vstupy můžete sledovat externí události, třeba překročení prahové úrovně vody nebo jednoduchý senzor dveří. Upozornění na dálku se odehrává prostřednictvím SMS.TeltonikaTRB141_Gateway_LTE_4G_RutOS_IoT_FOXON

Obsah standardního balení

  • TRB141 gateway,
  • Euro PSU,
  • 1× LTE anténa (kabel 3 m, SMA konektor, magnetická montáž),
  • kabel micro-USB 0,8 m,
  • kabel LAN,
  • I/O konektor,
  • 1× imbusový klíč,
  • stručný průvodce,
  • krabička.

MOBILE

  • Mobile module

    4G (LTE) – Cat 1 up to 10 Mbps, 3G – Up to 42 Mbps, 2G – Up to 236.8 kbps

  • Status

    Signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP, Bytes sent/received, connected band, IMSI, ICCID

  • SMS

    SMS status, SMS configuration, send/read SMS via HTTP POST/GET, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS autoreply, SMPP

  • USSD

    Supports sending and reading Unstructured Supplementary Service Data messages

  • Black/White list

    Operator black/white list

  • Multiple PDN

    Possibility to use different PDNs for multiple network access and services

  • Band management

    Band lock, Used band status display

  • APN

    Auto APN

  • Bridge

    Direct connection (bridge) between mobile ISP and device on LAN

  • Passthrough

    Router assigns its mobile WAN IP address to another device on LAN

NETWORK

  • Routing

    Static routing

  • Network protocols

    TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, FTP, SMTP, SSL v3, TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SMPP, SMNP, MQTT

  • VoIP passthrough support

    H.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets

  • Connection monitoring

    Ping Reboot, Wget Reboot, Periodic Reboot, LCP and ICMP for link inspection

  • Firewall

    Port forward, traffic rules, custom rules

  • DHCP

    Static and dynamic IP allocation, DHCP Relay

  • QoS / Smart Queue Management (SQM)

    Traffic priority queuing by source/destination, service, protocol or port, WMM, 802.11e

  • DDNS

    Supported >25 service providers, others can be configured manually

  • Network backup

    Mobile, VRRP, Wired options, each of which can be used as an automatic Failover

  • SSHFS

    Possibility to mount remote file system via SSH protocol

SECURITY

  • Authentication

    Pre-shared key, digital certificates, X.509 certificates, TACACS+, Radius, IP & Login attempts block

  • Firewall

    Pre-configured firewall rules can be enabled via WebUI, unlimited firewall configuration via CLI; DMZ; NAT; NAT-T

  • Attack prevention

    DDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks)

  • VLAN

    Port and tag-based VLAN separation

  • Mobile quota control

    Mobile data limit, customizable period, start time, warning limit, phone number

  • WEB filter

    Blacklist for blocking out unwanted websites, Whitelist for specifying allowed sites only

  • Access control

    Flexible access control of TCP, UDP, ICMP packets, MAC address filter

VPN

  • OpenVPN

    Multiple clients and a server can run simultaneously, 27 encryption methods

  • OpenVPN Encryption

    DES-CBC 64, RC2-CBC 128, DES-EDE-CBC 128, DES-EDE3-CBC 192, DESX-CBC 192,

    BF-CBC 128, RC2-40-CBC 40, CAST5-CBC 128, RC2-64-CBC 64, AES-128-CBC 128, AES-128-CFB 128, AES-128-CFB1 128, AES-128-CFB8 128, AES-128-OFB 128, AES-128-GCM 128, AES-192-CFB 192, AES-192-CFB1 192, AES-192-CFB8 192, AES-192-OFB 192, AES-192-CBC 192, AES-192-GCM 192, AES-256-GCM 256, AES-256-CFB 256, AES-256-CFB1 256, AES-256-CFB8 256, AES-256-OFB 256, AES-256-CBC 256

  • IPsec

    IKEv1, IKEv2, with 14 encryption methods for IPsec (3DES, DES, AES128, AES192, AES256, AES128GCM8, AES192GCM8, AES256GCM8, AES128GCM12, AES192GCM12, AES256GCM12, AES128GCM16, AES192GCM16, AES256GCM16)

  • GRE

    GRE tunnel, GRE tunnel over IPsec support

  • PPTP, L2TP

    Client/Server instances can run simultaneously, L2TPv3, L2TP over IPsec support

  • Stunnel

    Proxy designed to add TLS encryption functionality to existing clients and servers without any changes in the program’s code

  • DMVPN

    Method of building scalable IPsec VPNs

  • SSTP

    SSTP client instance support

  • ZeroTier

    ZeroTier VPN client support

  • WireGuard

    WireGuard VPN client and server support

  • Tinc

    Tinc offers encryption, authentication and compression in it's tunnels. Client and server support.

MODBUS TCP SLAVE

  • ID range

    Respond to one ID in range [1;255] or any

  • Allow Remote Access

    Allow access through WAN

  • Custom registers

    MODBUS TCP custom register block requests, which read/write to a file inside the router, and can be used to extend MODBUS TCP Slave functionality

MODBUS TCP MASTER

  • Supported functions

    01, 02, 03, 04, 05, 06, 15, 16

  • Supported data formats

    8-bit: INT, UINT; 16-bit: INT, UINT (MSB or LSB first); 32-bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC)

DATA TO SERVER

  • Protocol

    HTTP(S), MQTT, Azure MQTT, Kinesis

MQTT GATEWAY

  • MQTT Gateway

    Allows sending commands and receiving data from MODBUS Master through MQTT broker

DNP3

  • Supported modes

    TCP Master, DNP3 Outstation

MONITORING & MANAGEMENT

  • WEB UI

    HTTP/HTTPS, status, configuration, FW update, CLI, troubleshoot, event log, system log, kernel log

  • FOTA

    Firmware update from server, automatic notification

  • SSH

    SSH (v1, v2)

  • SMS

    SMS status, SMS configuration, send/read SMS via HTTP POST/GET

  • Call

    Reboot, Status, Mobile data on/off, Output on/off, answer/hang-up with a timer

  • TR-069

    OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystem

  • MQTT

    MQTT Broker, MQTT publisher

  • SNMP

    SNMP (v1, v2, v3), SNMP Trap

  • JSON-RPC

    Management API over HTTP/HTTPS

  • MODBUS

    MODBUS TCP status/control

  • RMS

    Teltonika Remote Management System (RMS)

IOT PLATFORMS

  • Cloud of Things

    Allows monitoring of: Device data, Mobile data, Network info, Availability

  • ThingWorx

    Allows monitoring of: WAN Type, WAN IP, Mobile Operator Name, Mobile Signal Strength, Mobile Network Type

  • Cumulocity

    Allows monitoring of: Device Model, Revision and Serial Number, WAN Type and IP, Mobile Cell ID, ICCID, IMEI, Connection Type, Operator, Signal Strength

  • Azure IoT Hub

    Can send device IP, Number of bytes send/received, Temperature, PIN count to Azure IoT Hub server, Mobile connection state, Network link state, IMEI, ICCID, Model, Manufacturer, Serial, Revision, IMSI, SIM State, PIN state, GSM signal, WCDMA RSCP, WCDMA EC/IO, LTE RSRP, LTE SINR, LTE RSRQ, CELL ID, Operator, Operator number, Connection type

SYSTEM CHARACTERISTICS

  • CPU

    ARM Cortex-A7 1.2 GHz

  • RAM

    128 MB, DDR2

  • FLASH storage

    512 MB, SPI Flash

FIRMWARE / CONFIGURATION

  • WEB UI

    Update FW from file, check FW on server, configuration profiles, configuration backup

  • FOTA

    Update FW

  • RMS

    Update FW/configuration for multiple devices at once

  • Keep settings

    Update FW without losing current configuration

FIRMWARE CUSTOMIZATION

  • Operating system

    RutOS (OpenWrt based Linux OS)

  • Supported languages

    Busybox shell, Lua, C, C++, and Python, Java in Package manager

  • Development tools

    SDK package with build environment provided

INPUT / OUTPUT

  • Input

    2 x Digital inputs (configurable passive or active), 1 x Isolated input, 1 x Analog input ( with 4-20 mA capability). 1 x Configurable Inputs. Digital input 0 - 5 V detected as logic low, 8 - 30 V detected as logic high.

  • Output

    2 x Relay outputs (latching and non latching). 1 x Configurable Output, Open collector output, max output 30 V, 300 mA

  • Events

    Email, RMS, SMS

  • I/O juggler

    Allows to set certain I/O conditions to initiate event

POWER

  • Connector

    4-pin industrial DC power socket

  • Input voltage range

    9 – 30 VDC, reverse polarity protection; surge protection >31 VDC 10us max

  • Power consumption

    < 5 W

PHYSICAL INTERFACES

  • I/O’s

    3 x Digital Inputs, 1 x Analog input, 2 x Relays on 16 pin connector, 2 x I/O pins on 4 pin power connector

  • Status LEDs

    3 x connection type status LEDs, 5 x connection strength LEDs, 1 x Power LED

  • SIM

    1 x SIM slot (Mini SIM – 2FF), 1.8 V/3 V

  • Power

    1 x 4-pin power connector

  • 1-Wire

    1 x 1-Wire interface on 16 pin connector

  • Antennas

    1 x SMA for LTE

  • USB

    1 x Virtual network interface via micro USB

  • Reset

    Reboot/User default reset/Factory reset button

PHYSICAL SPECIFICATION

  • Casing material

    Aluminum housing

  • Dimensions (W x H x D)

    74.5 x 25 x 64.4 mm

  • Weight

    136 g

  • Mounting options

    Bottom and sideways DIN rail, Flat surface

OPERATING ENVIRONMENT

  • Operating temperature

    -40 °C to 75 °C

  • Operating humidity

    10% to 90% non-condensing

  • Ingress Protection Rating

    IP30

REGULATORY & TYPE APPROVALS

  • Regulatory

    CE/RED, EAC, RoHS, WEEE

EMI IMMUNITY

  • Standards

    Draft ETSI EN 301 489-1 V2.2.0, Draft EN 301 489-19 V2.1.0, Draft ETSI EN 301 489-52 V1.1.0

  • ESD

    EN 61000-4-2:2009

  • RS

    EN 61000-4-3:2006 + A1:2008 + A2:2010

  • EFT

    EN 61000-4-4:2012

  • Surge protection
     

    EN 61000-4-5:2014

  • CS

    EN 61000-4-6:2014

  • DIP

    EN 61000-4-11:2004

RF

  • Standards

    EN 300 511 V12.5.1, ETSI EN 301 908-1 V11.1.1, ETSI EN 301 908-2 V11.1.2, ETSI EN 301 908-13 V11.1.2

SAFETY

  • Standards

    IEC 62368-1:2014(Second Edition), EN 62368-1:2014+A11:2017

     EN 50385:2017

     EN 62232:2017

Ke stažení
trb141 datasheet.pdf (pdf, 1.6 MB)