SICOM3000A industrial switch managed 8x100Mbit/s, PROFINET
SICOM3000A industrial switch managed 8x100Mbit/s, PROFINET
Why prefer a managed switch for PROFINET, EtherNet/IP and Modbus TCP/IP?
Industrial Ethernet (i.e. PROFINET, EtherNet/IP and Modbus TCP/IP) works even if you use an unmanaged switch. However, Industrial Ethernet is characterised by fast robust communication, and if an unmanaged switch is used, the robustness of the network decreases. Industrial Ethernet networks communicate in milliseconds, which unmanaged switches are not designed for.
Another big advantage of managed switches is support for SNMP and LLDP protocols. The SNMP protocol allows you to carry out diagnostics and read important information from the switch. You can also perform diagnostics through the switch's web interface or with diagnostic tools.
The LLDP protocol allows for exploring the network environment. This means that you can read out network topology and thus see which devices are connected to which ports. Information about your network's topology is essential for quick fault finding, which can save you money and minimise downtime in the event of a communication failure.
Key Features
- 8×10/100 Mbps RJ45 port
- Support for PROFINET, EtherNet/IP and Modbus TCP/IP
- Support for VLAN creation
- Port mirroring
- Support for SNMP v1, 2 and 3
- Support for DT-Ring and DT-Ring+ (no support for MRP)
- PROFINET IO diagnostics
- PROFINET GSDML file
- Port diagnostics
- Time synchronisation using NTP and SNTP
- Redundant power supply
- IP40 rating
- Compact dimensions and 35 mm DIN rail mount
SICOM3000A is Layer 2 DIN-Rail Managed Industrial Ethernet Switch. It provides a rich product port portfolio, 6/8/10/12/16/18/20 ports, 100/1000M SFP port, 12/24/48/110/220V power input. SICOM3000A supports DT-Ring (recovery time<50ms), DRP/DHP (recovery time<20ms), STP/RSTP/MSTP, VLAN, multicast, QoS, SSH and many other Layer 2 software features, and supports CLI, Telnet, Web management methods, Kyvision centralized management based on SNMPv1/v2c/v3. It supports IEEE1588 PTPV2, Automatic Configuration Backup and Restore, DDM(SFP port), PROFINET (-PN Model), EtherNet/IP and Modbus/TCP protocols. SICOM3000A is especially designed for harsh environments with wide operating temperature range, EMC level 3, IP40 protection class, strong vibration-resistent mounting clip for DIN-Rail installation, and can be deployed in Factory automation, Transportation, Oil & gas, wind power, distribution network automation and many other industrial applications.
| oftware functions | |
| Switching | Supports VLAN, PVLAN Supports GVRP Supports port aggregation, LACP Supports port flow control Supports Rate limit based on flow (ACL Rate Limiter) Supports Global broadcast storm suppression (QOS Storm Policing) |
| Redundancy | Supports DT-Ring, DT-Ring+, DT-VLAN with the recovery time<50ms Supports DRP/DHP with the recovery time<20ms Supports STP/RSTP/MSTP/G.8032 ERPS Supports MRP，MRM&MRC |
| Multicast | Supports IGMP snooping Supports GMRP Supports static multicast |
| Routing protocol | Supports static routing |
| Network Security | Supports HTTPS/SSL Supports SSH Supports TACACS+ Supports IEEE802.1X Supports RADIUS Supports User Classification Supports MAC address binding with switch ports |
| Service Quality | Supports QoS, 802.1p(CoS), DSCP Supports SP, WRR queue scheduling Supports ACL |
| Industrial protocol | Supports PROFINET (PROFINET Conformance Class B, PROFINET IO diagnosis, GSD files, Configuration and diagnostic via STEP 7) Supports EtherNet/IP Supports Modbus/TCP |
| Management and Maintenance | Supports Console, Telnet, WEB management methods Supports SNMPv1/v2c/v3, Kyvision centralized management Supports software upgrade by SFTP/HTTP Supports Power alarm, IP/MAC conflict alarm, Memory/CPU usage alarm, Port alarm, Ring alarm, Port traffic alarm, CRC error and packet lose alarm, SFP port RX power alarm and TX power alarm Supports DDM (SFP port) Supports loop detection Supports RMON Supports port mirroring Supports Syslog Supports LLDP Supports Link-check Supports Automatic Configuration Backup and Restore |
| IP Management | Supports DHCP server/snooping/client, DHCP Option 82 Supports ARP Supports IPv4/IPv6 |
| Clock Management | Supports SNTP Client Supports PTP |
| Technical Specification | |
| Technical Parameter | Standard IEEE 802.3i (10Base-T) IEEE 802.3u (100Base-T and 100Base-FX) IEEE 802.3ab (1000Base-T) IEEE 802.3z (1000Base-SX/LX) IEEE 802.3ad (Link aggregation) IEEE 802.3x (Flow Control) IEEE 802.1p (Class of Service) IEEE 802.1Q (VLAN) IEEE 802.1d (STP) IEEE 802.1w (RSTP) IEEE 802.1s (MSTP) IEEE 802.1x (Network Access Control) IEEE 802.1ab (LLDP) IEEE1588 V2 (PTP) |
| Switch Properties | Priority Queues 8 Number of VLANs 4K VLAN ID 1～4094 Number of Multicast Groups 8K MAC Table 8K Packet Buffer 4Mbit Packet Forwarding Rate 1.5Mpps (2SFP8T), 1.8Mpps (4SFP8T) 4.2Mpps (2GX8T), 7.2Mpps (4GX8T) 14.9Mpps (2GX8GE), 17.9Mpps (4GX8GE) 3.0Mpps (4SFP16T), 8.3Mpps (4GX16T) 2.4Mpps (8SFP8T), 13.1Mpps (8GX8T) 29.8Mpps (4GX16GE,12GX8GE), 23.8Mpps (8GX8GE) Switching Delay <5μs Jumbo frame 9.6KB |
| Interface | Gigabit Port 100Base-X, 1000Base-X, 10/100/1000Base-T(X) SFP slot 10/100/1000Base-T(X), RJ45 port, Auto MDI/MDI-X connection Fast Ethernet Port 100Base-X SFP slot 10/100Base-T(X), RJ45 port, Auto MDI/MDI-X connection Console Port RJ45, RS232 Alarm Contact 3-pin 5.08mm-spacing plug-in terminal block, 250VAC/220VDC Max, 2A Max |
| LED | LEDs on Front Panel Running LED: Run Alarm LED: Alarm Power LED: PWR1,PWR2 Ring LED: Ring Interface LED: Link/ACT, Speed (RJ45 port); Link/ACT(Fiber port) |
| Button | Reset: Reboot and restore default configuration |
| Power Requirement | Power Input 100-240VAC,50/60Hz;110-220VDC(85-264VAC/77-300VDC) 24-48VDC(18-72VDC) 12-24VDC(9-36VDC) Power Terminal 5-pin 5.08 mm-spacing plug-in terminal block (L2/L5) 3-pin 7.62 mm-spacing plug-in terminal block (HV) Power Consumption <12W (4GX8T) <16W (4GX8GE) <20W (4GX16GE,12GX8GE) Overload Protection Support Reverse Protection Support Redundancy Protection Support (12/24/48VDC) |
| Physical Characteristics | Housing Metal Cooling Natural convection, fanless Protection Class IP40 Dimension 66mm×135mm×107.5mm (6T,8T,2GX8T,4GX8T) (W×H×D) 88mm×135mm×137mm (8GE,2GX8GE,4GX8GE) (W×H×D) 102mm×135mm×137mm (16GE,2GX16GE,4GX16GE,8GX8GE,12GX8GE) (W×H×D) Weight 1.1Kg (6T,8T,2GX8T,4GX8T) 1.5Kg (8GE,2GX8GE,4GX8GE) 1.9Kg (16GE,2GX16GE,4GX16GE,8GX8GE,12GX8GE) Mounting DIN-Rail or Panel Mounting |
| Environmental Limit | Operating Temperature -40℃～+75℃ Storage Temperature -40℃～+85℃ Ambient Relative Humidity 5～95% (non-condensing) |
| Warranty | MTBF 1681195h (6T) 1675852h (8T) 1657563h (4GX8T) 1317486h (4GX8GE) 1272643h (12GX8GE) 1097144h (4GX16GE) Warranty 5 years |
| Approvals | CE, FCC EMC: EN 55032/35, EN 61000-6-4, EN 61000-6-2 Rail Traffic: EN 50121-4 UL61010, Class I Div 2, IECEx, ATEX Zone 2, Ex ec nC IIC T4 Gc IEC61850-3, IEEE1613 PROFINET Conformance Class B IEC 62368-1, EN 62368-1 |
| Industrial Standard | EMI: FCC CFR47 Part 15,EN55032/CISPR22,Class A EMS: IEC61000-4-2(ESD) ±6kV(contact),±8kV(air) IEC61000-4-3(RS) 10V/m(80MHz～2GHz) IEC61000-4-4(EFT) Power Port:±2kV;Data Port:±1kV IEC61000-4-5(Surge) Power Port:±1kV/DM,±2kV/CM;Data Port:±1kV IEC61000-4-6(CS) 10V(150kHz～80MHz) Machinery: IEC60068-2-6 (vibration) IEC60068-2-27 (shock) IEC60068-2-32 (free fall) Climatic environmental: IEC60068-2-1 Cold test IEC60068-2-2 Dry heat test IEC60068-2-14 Change of temperature test IEC60068-2-30 Damp heat cyclic test |
Highlighted items are mandatory.
Related products1
PROFINET training - principles, diagnostics and troubleshooting, 2 days
977,32 EUR incl. VAT