ACCON SIMATIC S5 Ethernet adapter
ACCON SIMATIC S5 Ethernet adapter
The ACCON S5 LAN is a TCP/IP adapter for programming and collecting data from the Simatic S5 (90U–155U series) over Ethernet. More
Manufacturer: Delta Logic Code: 11800
The ACCON S5 LAN is a TCP/IP adapter for programming and collecting data from the Simatic S5 (90U–155U series) over Ethernet. More
Manufacturer: Delta Logic Code: 11800
The pro for connections to S5 PLCs
ACCON-S5-LAN is a connection adaptor between a PC and a S5 PLC via TCP/IP. It is fed by the PLC's interface, an external power supply is not necessary.
Perfect fields of application
- As programming adaptor to create and change the PLC program
- As communication adaptor for visualizations
- As communication adaptor for accessing the PLC's data
Varied ranges of application
Programming a S5 PLC, e.g. with ACCON-PG or the Siemens STEP 5 software.
Visualising values of a S5 PLC with the DELTALOGIC S7/S5-OPC Server via TCP/IP.
Convincing and varied
In order to visualize and program simultaneously, the ACCON-S5-LAN has an integrated multiplexer.
With the included software, a virtual serial interface can be installed on the PC. Each software supporting a serial connection to the S5 PLC can therefore use the ACCON-S5-LAN.
Furthermore, the ACCON-S5-LAN supports the S5-TCP/IP (RFC 1006) protocol as well as the S7-TCP/IP (RFC 1006) protocol. Thus, the ACCON-S5-LAN can be used with all programs supporting these protocols without additional driver.
Technical highlights
- Compact connection of S5 PLCs to ethernet
- Quick and simple configuration and bringing into service
- Integrated multiplexer for simultaneous programming and visualization
- Access via virtual COM port
- Access via S5-TCP/IP (RFC 1006)
| Supported operating systems |
No limitations |
| Connection to the PC | RJ45 socket for Ethernet 10/100 Mbps with automatic detection, no cable included in delivery |
| Connection to the PLC | TTY with 15-pin SUB-D plug |
| Supported PLCs | S5 of the U series |
| Dimensions (W x H x D) in mm | 42 x 15 x 65 |
| Protection type | IP 20 |
| Supply voltage | 24 VDC from PLC interface Not possible with AG 90 and AG 95, external power supply necessary, e.g. this external power supply |
| External voltage feed possible | Yes |
| Power consumption | Max. 80 mA |
| Galvanically isolated | No |
| Integrated multiplexer | Yes |