ACCON COM USB Adapter for SIMATIC S5
- PLC adapters
- for SIEMENS
- Programming Adapters for SIMATIC S5
- ACCON COM USB Adapter for SIMATIC S5
ACCON COM USB Adapter for SIMATIC S5
The ACCON COM Cable USB is an adaptor with an integrated TTY converter, designed for connecting the Siemens Simatic S5 to a USB port. The included software creates a virtual serial interface that enables you to configure the USB port as, for example, COM1 port. More
Manufacturer: Delta Logic Code: 10203-USB
The ACCON COM Cable USB is an adaptor with an integrated TTY converter, designed for connecting the Siemens Simatic S5 to a USB port. The included software creates a virtual serial interface that enables you to configure the USB port as, for example, COM1 port. More
Manufacturer: Delta Logic Code: 10203-USB
S5 adaptor with USB connection
The ACCON-COM-Cable USB is an adaptor to connect a PC with a S5 PLC. It is fed via USB. Therefore, an external power supply is not necessary.
Perfect fields of application
- As programming adaptor to create and change the PLC program
- As communication adaptor for visualizations
- As communication adaptor for accessing the PLC's data
Varied ranges of application
Programming a S5 PLC, e.g. with ACCON-PG or the Siemens STEP 5 software, on a notebook without RS-232 interface
Connecting visualizations to S5 PLCs
Convincing and varied
The included software creates a virtual serial interface. Each software supporting a serial connection to the S5 PLC can therefore use the ACCON-COM-Cable USB.
Technical highlights
- Connection via USB
- No separate power supply necessary
- Even usable with STEP 5
- Support: Windows 2000, XP, 2003 - does not support 64 bit versions
- If you need to run on another operating system you must use ACCON COM PC RS232 adapter for SIMATIC S5 + USB-RS232 adapter
Supported operating systems | Windows 2000, XP, 2003 - no 64 bit versions |
Connection to the PC | USB connection cable stationary mounted, 3 m or 5 m depending on model |
Connection to the PLC | TTY with 15-pin SUB-D plug |
Supported PLCs | S5 of the U series |
Protection type | IP 20 |
Supply voltage | Via USB |
Galvanically isolated | No |
Extension possible | Yes, max. 10 m USB extension |